水平衡法与高温转化法在矿泉水氢氧稳定同位素测定中的应用

为了鉴别不同品牌矿泉水标注水源地信息真伪,对11种不同品牌饮用水的氢氧稳定同位素(δD和δ18 O)进行测定。结果表明,水平衡法(GasBench-IRMS)和高温转化法(TC/EA-IRMS)的测定结果一致性较好,两种方法测定6种不同饮用水的δD和δ18 O的平均差异分别为(0.6±1.59)‰和(0.02±0.13)‰。水平衡法需要较长的制备和测定时间,但δD和δ18 O的测定精度明显优于高温转化法。11种饮用水δD和δ18 O变化范围较大,其δD和δ18 O受不同品牌饮用水的水源地降水影响形成明显的地域性。虽然无法区分矿泉水是否由其他类别饮用水伪造,但δD和δ18 O可以为特定区域(如高海拔与沿海地区)以及产地相近的矿泉水水源地鉴别提供依据。     

第七届世界军人运动会核与辐射风险评估与控制

武汉市涉核单位众多,存在一定的核与辐射事故风险。通过对武汉市举办第七届世界军人运动会可能存在的核与辐射风险因素进行识别及评价,确定可能发生的12类核与辐射事故类型及风险水平,进而有针对性的制定风险防控措施,做到辐射应急管理关口前移,在保证军运会期间核技术利用单位正常生产活动的基础上有效的保障了核与辐射安全。     

Experimental investigation and numerical simulation analysis of sintered micro-fluidic devices

ABSTRACT

This study investigates the use of numerical simulations to describe the solid-state diffusion of a sintering stage during a metal injection moulding process for micro-fluidic components with 316L stainless steel powders. Finite element (FE) analysis based on a thermo-elasto-viscoplastic model was conducted to describe the densification process of a stainless steel porous component during solid-state sintering. The numerical analyses, which were performed on a 3D micro-structured component with various powder volume loadings to take into account the thermal debinding effect to propose a full debinding sintering simulation, demonstrated that the FE simulation results are in agreement with the experimental ones.     

Characterization of superficial modification of ferrous rusted substrates subjected to dechlorination-electrochemical process

Preservation of archaeological artefacts after their removal from saline media is a difficult task due to the chloride content of the oxide layers which are unstable in atmospheric conditions, especially if the relative humidity exceeds 85%. For this reason, removal of chlorides from rust layers is one of the priorities of conservationists or restorers of historical artefacts. However, removal of chloride ions is not an easy procedure because of the many considerations involved in the process. In this research, artificially pre-rusted iron samples and an actual historical cannonball were subject to a dechlorination process in a potassium hydroxide solution to measure constant chloride release in a bulk solution. After the chloride removal process, a commercial protective layer was applied to the rust for stabilization purposes. It was calculated that the kinetics of the dechlorination process is driven by diffusion behaviour following Fick’s second law. When this diffusion process prevails, the dechlorination extraction affects the integrity of rust layers as is demonstrated with scanning electron microscopy and X-ray diffraction analyses. It was proven that the chloride removal procedure causes the studied iron layers to stiffen, provoking superficial modification and, in some cases, fractures of the rust. By means of electrochemical impedance spectroscopy it was calculated that the magnitude of the positive effect of the dechlorinated samples depends on the protective features of the rust. Therefore, this research reveals that an efficient chloride removal procedure depends on the electrochemical properties of the dechlorination process and the initial morphology of the iron rust.     

Glucosamine Extends the Lifespan of Caenorhabditis elegans via Autophagy Induction

Glucosamine (GlcN) is commonly used as a dietary supplement to promote cartilage health in humans. We previously reported that GlcN could induce autophagy in cultured mammalian cells. Autophagy is known to be involved in the prevention of various diseases and aging. Here, we showed that GlcN extended the lifespan of the nematode Caenorhabditis elegans by inducing autophagy. Autophagy induction by GlcN was demonstrated by western blotting for LGG-1 (an ortholog of mammalian LC3) and by detecting autophagosomal dots in seam cells by fluorescence microscopy. Lifespan assays revealed that GlcN-induced lifespan extension was achieved with at least 5 mM GlcN. A maximum lifespan extension of approximately 30 % was achieved with 20 mM GlcN (p<0.0001). GlcN-induced lifespan extension was not dependent on the longevity genes daf-16 and sir-2.1 but dependent on the autophagy-essential gene atg-18. Therefore, we suggest that oral administration of GlcN could help delay the aging process via autophagy induction.     

含聚环氧乙烷链段梳形结构聚(异戊二烯-g-苯乙烯)的合成与表征

以聚苯乙烯(PS)大分子单体和异戊二烯为共聚单体,四氢呋喃为调节剂,正丁基锂为引发剂,三异丁基铝为助引发剂,脂肪族缩水甘油醚为官能化改性剂,采用一锅法经活性负离子共聚合制得以聚异戊二烯为主链、PS为规整侧链,且末端含星形聚环氧乙烷链段的极性化梳形聚(异戊二烯-g-苯乙烯-s-环氧乙烷)(PI-g-PS-s-PEO),利用凝胶渗透色谱仪、傅里叶变换红外光谱仪、差示扫描量热仪等对所制备的PI-g-PS-s-PEO进行了表征,并考察了PI-g-PS-s-PEO中聚环氧乙烷链段(PEO)质量分数(w_(PEO))的影响因素。结果表明,产物具有分子结构可设计、分子量分布窄等优点。此外,PS大分子单体分子量对w_(PEO)无影响,减小缩水甘油醚分子量、增加其用量及延长封端反应时间均可提高w_(PEO),且w_(PEO)在0.1%～1.8%可调。     

高密度聚乙烯/丁苯橡胶热塑性硫化胶的形状记忆性能

采用动态硫化法制备了高密度聚乙烯(HDPE)/丁苯橡胶(SBR)热塑性硫化胶(TPV),研究了橡塑比、定型温度、回复温度及增容剂苯乙烯-丁二烯-苯乙烯嵌段共聚物(SBS)对HDPE/SBR TPV形状记忆性能的影响,观察了其微观结构,提出了形状记忆行为机制。结果表明,HDPE/SBR TPV具有典型的"海-岛"结构,拉伸后其表面存在明显的取向结构;SBS能显著提高HDPE/SBR TPV的形状记忆性能,当SBS用量为6份、定型温度和回复温度均为120℃时,HDPE/SBR TPV的形状记忆性能最佳。     

铜吡啶配合物催化合成1-甲氧基-2,2,6,6-四甲基哌啶-4-醇

目前1-烷氧基-2,2,6,6-四甲基哌啶基化合物的合成主要是以醛酮法为主。醇法合成虽然醇价格便宜，但合成效率很低。为解决这一问题，本文对醇法合成工艺进行了深入探讨，并以乙醇和4-羟基-2,2,6,6-四甲基哌啶氮氧自由基（ZJ-701）为原料，30%过氧化氢为氧化剂，氯化铜和吡啶配合物为催化剂，通过氧化和自由基偶合合成了1-甲氧基-2,2,6,6-四甲基哌啶-4-醇，通过红外光谱、核磁共振谱和质谱表征了其结构。通过实验进一步优化了反应时间、温度等一系列合成条件。研究结果表明：当反应时间为12h，反应温度为78℃，n(ZJ-701)∶n(乙醇)∶n(H₂O₂)∶n(CuCl₂)∶n(吡啶)=1∶39.25∶17.01∶0.034∶0.36时，产品产率最高，为60.6%，质量分数为98.8%，熔点为87～90℃。该方法具有原料乙醇便宜易得、反应条件温和、产品提纯容易等优点。     

Microstructure evolution during thermomechanical processing in 3Mn-0.1C medium-Mn steel

ABSTRACT

Medium-Mn steels are energetically investigated as a candidate of the third generation advanced high strength steels (AHSSs). However, their phase transformation and microstructaure evolution during various heat treatments and thermomechanical processing are still unclear. The present study first confirmed the kinetics of static phase transformation behaviour in a 3Mn-0.1C medium-Mn steel. Hot compression tests were also carried out to investigate the influence of high-temperature deformation of austenite on subsequent microstructure evolution. It was found that static ferrite transformation was quite slow in this steel, but ferrite transformation was greatly accelerated by the hot deformation in austenite and ferrite two-phase regions. Characteristic dual-phase microstructures composed of martensite and fine-grained ferrite were obtained, which exhibited superior mechanical properties.

This paper is part of a Thematic Issue on Medium Manganese Steels.     

Friction stir welding of API X70 steel incorporating Ti-dioxide

In the present work, the microstructural evolution and hardness of HSLA X70 joined by friction stir welding were investigated. The FSW was applied to HSLA X70 with and without the addition of titanium dioxide (TiO₂) powders. To evaluate the microstructural features and hardness of different weld zones, optical microscopy and Vickers microhardness measurements were applied. The results show that the distribution of TiO₂ powders is strongly dependent on the applied friction stir processing, which in turn changed significantly the microstructure and hardness profile. In this regard, the optimum stirring action resulted in a homogeneous and fine dispersion of particles leading to the domination of an acicular ferrite phase with a hardness of 370 HV. On the other hand, the lower stirring action resulted in coarse particles as well as the development of the polygonal ferrite structure with a hardness of ～185 HV.